Discount Shopping Deals Holiday Bargains Shop By Catagory With Free Shipping Closeouts Todays Deals Clearance On Sale Home
Browse by Merchant

Contractor Supplies

Contractors Direct sells a variety of Tile Tools and Stone Tools, Concrete Tools and Masonry Tools, & General Tools including tile saws, tile cutters, concrete saw, generators, water pumps, power tools, MK Diamond, Dewalt, Makita, Wacker, Husqvarna, Multiquip, & more.

130156 Diteq Vacuum plate assembly

Price: 749.99
130156
Contractors Direct

  • Vacuum plate assembly
  • Fits Teq-Track saw.

  • 134684 Blade Wrench for Tile Saw

    Price: 4.29
    134684
    Contractors Direct

    Universal Blade Wrench for Tile Saw

    • Nut wrench for blade removal.
    • For Nut, 5/8-18 Hex
    • Fits Husqvarna, Target, Felker, Dewalt and MK saws

    1363299 2ft Long Reach Scaller

    Price: 389.99
    1363299
    Contractors Direct

    2ft long for walls, small areas

    • Use chisel for removing concrete, floor tile, vinyl tile etc.
    • Sharp scraper blade available for vinyl floors, wall tile, thin set etc.
    • Weight 7 lbs. 2200 blows per minute.
    • Operates at 90 PSI. Air consumption 4.5 SCFM.
    • Only 1.5 HP compressor required.
    • 4" chisel included. One year warranty.


    150741 MK Tile Saw 24in Tile Cutting Kit

    Price: 172.00
    150741
    Contractors Direct

    MK Tile Saw 24in Tile Cutting Kit

    • Zinc-plated support fixture that permits 24" straight rip cutting.
    • For MK-101 & MK-100 only.


    151329 MK Stone Saw 50in Stand

    Price: 399.99
    151329
    Contractors Direct

  • MK Stone Saw 50" Stand

  • 151330 32in MK Stone Saw Stands

    Price: 345.00
    151330
    Contractors Direct

  • 32" MK Stone Saw Stands

  • 151348 MK Stone Saw 32inx20in Side Table

    Price: 692.00
    151348
    Contractors Direct

  • MK Stone Saw 32"x20" Side Table

  • 151349 MK Stone Saw 60inx20in Side Table

    Price: 769.00
    151349
    Contractors Direct

  • MK Stone Saw 60"x20" Side table

  • 151991 MK-101 Wet Tile Saw

    Price: 959.00
    151991
    Contractors Direct

    MK-101 Features

  • Free shipping from MK factory warehouse to lower 48 states
  • Free 10" MK diamond blade, Water Pump, Rip Guide, 45º Bullnose Miter
    • Fully enclosed high torque, fan-cooled motor
    • Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
    • Multi-position motor post and cutting head for convenient cutting of various tile sizes
    • Built-in water distribution system supplies water to both sides of blade
    • Variable height cutting head allows for plunge cuts and use of blades smaller than 10" in diameter
    • Accommodates 6" and 8" profile wheels
    • Micro V-belt drive
    • Blade shaft lock for easy blade removal
    • Linear-bearing and chrome plated guide-bar assembly ensure precise cutting
    • Cast aluminum blade guard and motor post
    • One-piece reinforced zinc-plated steel frame
    • One-year limited warranty


    153262 Water Pan for MK-101PRO 24 & MK-1070

    Price: 71.50
    153262
    Contractors Direct

  • Water Pan for MK-101PRO 24 & MK-1070 Wet Tile Saws
  • Drain plug included


  • 156426 MK ATS Saw Stand

    Price: 529.00
    156426
    Contractors Direct

    Mk ATS Saw Stand

    • Versatile and highly mobile saw stand with zinc-plated square steel tubing
    • 10" pneumatic tires, and removable side table
    • Tile saw not included.


    158365 MK-2000P 2-Speed Hand Held Wet Core Drill

    Price: 849.00
    158365
    Contractors Direct

    MK-2000P 2-Speed Hand Held Wet Core Drill

    General Information

    • Slip clutch
    • Thermal overload switch
    • Electronic torque limitation and speed control
    • Built-in water swivel
    • Ground Fault Interrupter
    • Metal carrying case
    • 5/8" x 11 UNC and 1-1/4" x 7 UNC connecting threads


    158366 MK-1300 1-Speed Hand Held Dry Core Drill

    Price: 512.00
    158366
    Contractors Direct

  • Compact and lightweight, this single-speed, shock-free drill can be used to create accurate openings up to 3-1/4" in brick, limestone, cinder blocks and other abrasive materials.
  • Dry drilling only.
  • A slip clutch protects the operator in case of jamming.
  • The MK-1300 is supplied in a metal carrying case.

  • 158367 MK-2000 2-Speed Hand Held Dry Core Drill

    Price: 659.00
    158367
    Contractors Direct

  • The MK-2000 is a powerful dry diamond core drill for shock-free drilling in brick and other abrasive materials.
  • This professional tool is suited to create wall and ceiling orifices up to 5-1/4" in diameter.
  • Electronic torque limitation and speed control guarantee constant Rpm even under load.
  • MK-2000 Features

    • Mechanical safety clutch
    • Acoustic overload indicator
    • Electronic torque limitation and speed control
    • Metal gearbox housing
    • Maintenance-free double-speed gearbox
    • Metal carrying case


    158368 MK-130/3 3-Speed Hand Held Wet Core Drill

    Price: 1,109.00
    158368
    Contractors Direct

    MK-130/3 3-Speed Hand Held Wet Core Drill

    General Information

    The MK-130/3 is a fast, efficient drilling system. Use it hand-held for up to 3" diameter and/or rig-mounted for up to 6" diameter core bit.

    The MK-130/3 combines a robust all aluminum housing with a compact size and powerful 17 Amp motor. The heavy-duty design and power reserve make it suitable for continuous use. The mechanical 3-speed gearbox allows the operator to select the best speed for the core bit diameter. The result is optimum drilling and longer tool life.

    The MK-130/3 includes a built-in leveling bubble, safety slip clutch, carrying case, water swivel, thermal overload signal and Ground Fault Circuit Interrupter.


    159253 MK Core Drill Stand

    Price: 715.00
    159253
    Contractors Direct

    MK Core Drill Stand

    • MK Core Drill fits MK-130/3P wet hand held core drills and hand held core drills with 60mm motor mount
    • MK-2000P wet hand held core drills and MK-1300 & MK-2000 dry hand held core drills require adapter sleeve for 53 mm motor mount
    Technical Information
    • Max Bit Capacity: 6"
    • Dimensions: 9"W x 15.5" L x 30.5"H
    • 27" usable carriage travel
    • Weight: 21 lbs


    159346 MK-CX-3 6hp Robin Walk-Behind Concrete Saw

    Price: 1,219.00
    159346
    Contractors Direct

    MK-CX-3

    • Free shipping from MK factory warehouse
    • Free 12" MK-CX-10 Diamond Blade
    • 6 HP Robin engine
    • Depth of cut with 14" blade is 5-1/2"
    • Compact, lightweight, engineered for maneuverability and reliability
    • Can be used for wet or dry cutting
    • Aluminum frame construction
    • Cast-aluminum hinged blade guard
    • Built-in water distribution system supplies water to both sides of blade
    • Blade guard mounts on either left- or right-hand side of saw and cuts within 1" of wall or curb
    • Sturdy single piece steel motor mount weldment to minimize vibration
    • 1" diameter blade shaft with self aligning bearings
    • Folding handle bar for compact transport
    • Poly V-belt
    • Tachometer on Honda Engine
  • 8% sales tax on orders shipped to residence of CA

  • 159870 Side Table for MK-212 Tile Saw

    Price: 179.00
    159870
    Contractors Direct

  • Side table for MK-212 Wet tile saw

  • 160294 MK-333JB 10in Porcelain Diamond Blade

    Price: 54.99
    160294
    Contractors Direct

    MK-333JB 10" Porcelain Diamond Blade

    • Standard grade wet only, thin-rim blade for porcelain & vitreous tile
    • The MK-333JB blade has tension slots to prevent dishing & blade wobble
    • 5/8" standard arbor
    • .060 Width, Rim height 8mm


    160488 MK-370EXP, MK-770EXP Extension Side Table

    Price: 19.89
    160488
    Contractors Direct

  • Side Table Extension for MK-370EXP & MK-770EXP Wet Tile Saws.

  • 160509 MK 115V Electric Water Pump

    Price: 119.00
    160509
    Contractors Direct

  • 115V Electric Water Pump for MK-5000 Series Electric Saws

  • 160510 MK 220V Water Pump

    Price: 90.00
    160510
    Contractors Direct

  • 220V Electric Water Pump for MK Brick & Block Saws

  • 160970 4in MK-250GXT Turbo Dry Porcelain Blade

    Price: 25.99
    160970
    Contractors Direct

    4" MK-250GXT Turbo Dry Porcelain Blade

    • Dry cutting, turbo rim diamond blade.
    • Clean chip-free cutting on porcelain and granite.
    • 7/8"-5/8" arbor
    • 7mm rim height


    162075 MK-100, MK-101, MK-1070 Side Extension Table

    Price: 45.99
    162075
    Contractors Direct

  • Side Extension Table for MK-100 series, MK-101 series & MK-1070 wet tile saws.

  • 162675 MK Manta IV Core Drill Rig

    Price: 1,104.00
    162675
    Contractors Direct

    MK Manta IV Core Drill Rig

  • Free shipping to a commercial address in the continental US
  • Technical Information
    • Motor: 2-1/2 hp, 110 V, 18 Amp electric motor
    • No Load Speed: 700 RPM
    • Motor Spindle: 1-1/4" UNC
    • Drilling Capacity: 6"
    • Carriage Travel: 21"
    • LxWxH: 15" x 9-1/2" x 34"
    • Weight: 30.5 lb
    General Information
    • For wet cutting of concrete, stone and masonry
    • 6" maximum bit capacity
    • Thermal overload protection
    • Anchor base for vertical and horizontal drilling
    • Four base leveling screws for precise drill alignment
    • Single lever "slip-through" feed handle
    • Integrated water feed with flow valve and quick disconnect hose fitting


    164111 4in MK-250GX Continuous Dry/Wet Porcelain Blade

    Price: 25.99
    164111
    Contractors Direct

    4" MK-250GX Continuous Dry/Wet Porcelain Blade

    • Dry/Wet cutting, continuous rim diamond blade
    • Clean chip-free cutting on porcelain and granite.
    • 7/8"-5/8" arbor
    • 7mm rim height


    2000 Trelawny 5' Pneumatic Long Reach Scraper

    Price: 469.99
    2000
    Contractors Direct

    Trelawny 5' Pneumatic Long Reach Scraper

    • 5' Long, for floors. Use chisel for removing concrete, floor tile,
      vinyl tile etc.
    • Scraper blade available for vinyl floors, wall tile, thin set etc.
    • Weight 14 lbs. 2200 blows per minute.
    • Operates at 90 PSI. Air consumption 4.5 SCFM.
    • Only 1.5 HP compressor required.
    • 4" chisel included. One year warranty.


    2001 Trelawny 4in Chisel

    Price: 54.99
    2001
    Contractors Direct

  • 4" Chisel for use with the Trelawny Long Reach, or the Python.

  • 20010 Trelawny Python Pneumatic Scraper

    Price: 589.99
    20010
    Contractors Direct

    Trelawny Python Pneumatic Scraper

    • Curved handle design is more comfortable to use.
    • 2200 blows per minute, air consumption 6 CFM at 90 PSI.
    • 2 HP compressor required.
    • 5 ft. long, Weighs 18 lbs.
    • Use chisel for removing concrete, floor tile, marble etc.
    • Scraper blade available for vinyl floors, wall tile, thin set etc.


    20011 Trelawny Long Reach Breaker

    Price: 924.99
    20011
    Contractors Direct

    Trelawny Long Reach Breaker

    • Free 3" chisel
    • 5ft long, weighs 30 lbs. For the removal of though ceramic, marble, granite, thinset or any difficult removal application.
    • The breaker can even fracture concrete slabs.
    • 2" stroke combine with a 2" cylinder bore.
    • 90 PSI, Air consumption 25 SCFM.


    20012 Trelawny 1in Breaker Chisel

    Price: 63.00
    20012
    Contractors Direct

  • 1'' Trelawny Breaker Chisel

  • 20013 Trelawny 2in Breaker Chisel

    Price: 71.00
    20013
    Contractors Direct

  • 2'' Trelawny Breaker Chisel

  • 20014 Trelawny 3in Breaker Chisel

    Price: 61.99
    20014
    Contractors Direct

  • Trelawny 3" Breaker Chisel

  • 20015 Trelawny 4in Chisel Breaker

    Price: 143.99
    20015
    Contractors Direct

  • 4" Chisel fits the Trelawny Breaker

  • 2002 Trelawny Scraper Blade Holder

    Price: 68.99
    2002
    Contractors Direct

  • 4" Scraper blade holder, for the Trelawny Pneumatic Long Reach or Python models.
  • Choose from 4", 8" or 12" sharp tempered steel blades.

  • 20052 Alpha AWP-158 Wet Polisher

    Price: 223.00
    20052
    Contractors Direct

    Alpha AWP-158 Wet Polisher

    • Designed for polishing, shaping and light grinding.
    • Flexible rubber splash guard and caster assembly for extra stability while polishing flat areas.
    • Weight 6 lbs, 3000 Rpm, 115 Volts, 7.8 Amps.
    • Spindle thread 5/8"-11.
    • Ground fault interrupter included.
    • Includes water valve, hose, reversible handle,faucetgarden hose adapter, wrenches.
    • Powerful workhorse suitable for use in the shop or on the job site.
    • The AWP-158 features several improvements over previous generations of polishers.
    • In addition to the increased power and spindle speed, there are two types of handles included: a side handle for edge profiling and polishing and a “C” handle for core drilling and flat surface polishing.
    • There is a flat polishing caster designed to improve stability during scratch removal operations for a better final finish.
    • The AWP-158 is double insulated and equipped with a power cord that is 10 feet long and has a built-in GFCI (Ground Fault Circuit Interrupter) for safety.
    • Also for safety and abrasive longevity, the polisher has a center water-feed and water supply with convenient garden hose attachment.
    • All these components are packed in a handy carrying case suitable for transporting and storing the AWP-158 and its accessories.
    • Designed to perform polishing and several other operations, the AWP-158 is suitable for use with the Alpha® DS Style Shaping Wheel, the Alpha® Profiler and Alpha® Core Bits, as well as, the entire line of Ceramica polishing pads.
    • This is a must-have tool for all fabricators/installers of granite, marble, engineered stone and porcelain slab and all tile contractors.


    20053 Alpha VSP-120 Variable Speed Wet Polisher

    Price: 279.99
    20053
    Contractors Direct

    Alpha VSP-120 Wet Variable Speed Polisher

    • The new VSP-120 comes with variable speed control switch with an automatic speed feed-back system to maintain consistent RPMs with or without a load.
    • This switch has also expanded the usable RPM range from 500 RPM to 2,800 RPM.
    • The new RPM range reduces heat build-up when polishing Engineered Stone, which eliminates burning or scorching the work piece.
    • Alpha® has also added a Splash Guard that can be trimmed to adjust the height for the best comfort and protection.
    • Every stone fabricator should try the new VSP-120 variable speed wet polisher to achieve the best performance and high quality results.
    • For polishing, shaping and light grinding.
    • Designed especially to polish engineered stone which requires low RPMs.
    • Weight 7.3 lbs, Variable speed 500-2800 RPM, 115 V, 7 AMPS.
    • Spindle thread 5/8”-11. Ground fault interrupter included.
    • Includes set of extra brushes, water valve, hose, reversible handle, faucetgarden hose adapter, wrenches.


    2022 4in Alpha Quick Change Backer Pad for PVA

    Price: 52.99
    2022
    Contractors Direct

    4" Alpha Quick Change Backer Pad for PVA

    Alpha® PVA Quick Change System is a low speed version of the original “Makita® style” PVA and is designed for use on an aluminum snail-lock backer plate specifically developed for low speed polishing tools

    • Necessary for attaching PVA quick change wheels to a low speed sander / polisher.
    • Max Rpm 4000.
    • The aluminum backer plate is attached to the polishing tool and each of the pads has a snail lock adapter.
    • The adapter simply fits into place and locks on with a twisting motion.
    • To remove the pads simply untwist and remove, then replace with the next grit.
    • This “Quick Change” process saves time & increases productivity
    • Marble shops, tile installers or anyone else that already has access to a low speed polishing tool will find that the Alpha® PVA Quick Change system will speed up their productivity.


    2031 6in x 2in QEP Margin Float

    Price: 4.99
    2031
    Contractors Direct

    6" x 2" QEP Margin Float

    • 6" x 2" Margin float with a 1/8" gum rubber sole on lightweight foam pad.
    • Ideal for hard-to-reach areas such as kitchen backsplashes or under toe-kick.
    • Perfect for floors, walls and countertops wood handle, use with sanded and non-sanded grout.


    2032 Diamond Hand Pad Polishing Kit

    Price: 100.99
    2032
    Contractors Direct

    Diamond Hand Pad Polishing Kit

    Our flexible diamond sheets come standard with hook and loop backing. Used with the heavy duty re-usable hand pad

    • Kit includes, 70, 120, 220, 400, 600, 800, 1800 & 3500 diamond grit polishing strips
    • The re-usable hand pad provides more control and less waste.
    • Ergonomically designed Hook and Loop backed hand-block
    • Diamond hand-pads works great on marble, granite, agglomerated stone, ceramics, glass and composites
    • Their ideal hand size allows for easy finishing to surface shapes and areas that are hard to reach with power tools
    • Not for use on polished flat surfaces
    • Hand block size is 2-1/4" x 4"


    3002 Felker Air Foot Switch

    Price: 106.00
    3002
    Contractors Direct

    Felker Air Foot Switch

    • Now, a safer way to turn off your saw by foot, using a blast of air.
    • No need to worry about getting the foot switch wet.
    • Comes with 10ft of air hose.

    3004 Felker Fence-Pro Tile Saw Guide

    Price: 96.99
    3004
    Contractors Direct

    Fence-Pro Features

    • Holds tile in place while cutting or profiling.
    • 1/4" increment marks assist with slightly out of square cuts.
    • Eliminates the need for pre-marking off-the-table cuts.
    • Fence Pro is for Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.
    • For Husqvarna and 2008 Felker saws use item number 3005


    3008 Tile Saw Stand for Husqvarna, Target, & Felker Tile Saws

    Price: 84.99
    3008
    Contractors Direct

    Folding stand for Tile Saws.

    • Husqvarna Tilematic, TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.


    3009 Cutting Pckg. for Husqvarna, Target, & Felker Tile Saws

    Price: 49.99
    3009
    Contractors Direct

  • Cutting Package for Husqvarna Tilematic TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.
  • Includes Miter Guide, Adjustable Protractor Guide, & Dual 45 Angle Guide

  • 30091 Rubber Drain Plugs

    Price: 5.20
    30091
    Contractors Direct

  • For use with MK-Diamond, Target, Felker, Dewalt, and other wet tile saws
  • Dental Plans | Insurance | Careington Dental
    Home | Privacy Policy | About Us